Utilize a Pneumatic Forklift
You could usually find pneumatic forklifts in warehouses and shipping operations. Also called pump trucks or pallet trucks, they are utilized in order to transport supplies and products around on wooden pallets utilizing metal forks that are mounted on a wheeled counterweight. The counterweight has a pump that could raise the forks off the ground. A pallet truck is designed to be operated by one individual.
Pallet trucks should be operated with care to prevent loss of control while raising heavy loads. Machine must be inspected before operating. Clear the wheels area of any obstacle. Make certain that the handle turns smoothly. The pallet must be stacked carefully to guarantee that nothing will fall off during transportation.
On the end of the pallet truck's handle, squeeze the level found on the inside of the metal loop in order to release the air in the pump and lower the forks. The forks could then be pushed into the slots of the pallet. The forks should be in the middle to guarantee equal distribution of the pallet's weight across them. Lift the forks from the ground by pumping the handle of the pneumatic lift until the pallet has completely cleared the ground. Do not raise the pallet very high or the forklift can unbalance.
Move the pallet by pulling on the handle and then dragging it behind you. It is dangerous to push the pallet in front of you because the momentum could cause it to go out of control. Take turns slowly and don't try to stop abruptly. Slowly come to a stop, squeeze the lever, and the forks would lower to the ground. Finally, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent place.