As opposed to a sit-down unit, the stand-up lift truck model is totally different to operate. The method at which you lift cargo and your movements are completely different. If you do not have proper training for operating a stand-up model, you could probably cause harm to yourself or to co-employees. When using a stand-up unit, you need to follow the correct safety regulations. There are some basic operating standards that need to be met when utilizing a stand-up model.
To begin on a stand-up model forklift, it is essential to get a good feel for the controls and the steering knob. Rather than a steering wheel, the steering is handled utilizing the knob steering plate. Remember that this knob moves exceptionally fast, therefore, you must be accustomed to moving it carefully so as to be sure not to over steer. The horn is situated on the control handle, as is the control for backwards, forwards and the fork movement. The floor pedal allows the machine to move.
Turn the key to start the forklift's engine if you are ready to begin. The forks should be retracted at this stage. If you are moving all-over the floor, the forks should be pointed slightly upwards. Do not drive with extended forks. If you are moving forward, move the control handle forward and step on the pedal in order to make the lift move forward. If you are backing up, be certain to beep your horn to warn people around you. Look behind you before stepping on the pedal so as to make sure the path is safe and clear. Next, pull the control handle towards you while stepping on the pedal. Always stay alert and focused and make sure that you are always operating in a safe manner.
When approaching a corner with the lift truck, turn the steering knob towards the direction you are heading. Make sure to keep your foot on the accelerator and keep your hands on the control handle. When turning right, the steering knob will move in a clockwise direction while moving forward. If you are turning left, your steering knob would go in a counter-clockwise direction.
If you have only used sit down units, the stand-up versions could take some getting used to. With some training and taking some time to know the machinery, you would be able to quickly and efficiently handle loads in little time.